BLACK+DECKER 6-inch Random Orbit Waxer/Polisher (WP900)

 BLACK+DECKER 6-inch Random Orbit Waxer/Polisher (WP900)

•  Random-orbit action assures a uniform finish - fast for the car polisher
• Comfortable two-handle design of the variable speed polisher reduces fatigue
• 10 ft. cord for great mobility
• Includes foam applicator for easily applying wax or polish
• Includes polishing bonnets for a high-quality finish
• Runs on random orbit at 4,400 orbits per minute for a swirl-free finish
• 10-foot cord accommodates car and boat polishing projects

How to use a polisher in a practical way?

The correct use of the polisher will allow you to take full advantage of this tool to obtain excellent results in your work.

Get excellent results in your work using the polisher correctly. Learn how to use a polisher below.



How to use a polisher?
1. To use a polisher you have to hold it with both hands, one on the handle and the other on the trigger.

2. Ensures that the guard is always facing upward.

3. Position the tool on the side of your body.

4. Run the polisher when it is in the cutting position and always use it horizontally, cutting or grinding with the edge of the wheel.

5. When finished, it must be detached from the material worked, and only then turn it off, so that the disc does not jump or damage the surface.



In what tasks to use a polisher?
Its use will depend on the characteristics of the project and the type of polisher.

As it is used in construction work and in industries, its use is aimed at cutting, roughing and polishing materials such as steel, ceramic and concrete.

Bench grinder: Its main function is to sharpen instruments such as chisels, brush blades, scissors, and also to remove rust.




Recommendations for use and maintenance for polishers
Use tips
- As a general rule, you must always change and tighten the disc with the polisher unplugged, for this change you must use a wrench that comes in the tool kit.

- Replace with the recommended diameter and type disc.

- Do not use worn discs.


Security advice
- Wear a bib, ear plugs, goggles or a face mask, a mask depending on whether a lot of dust comes out, and leather gloves.

- Do not plug it into multiple.

- Keep the ventilation ducts clean and clear.

- The operator must be located outside the projection of the particles.




Maintenance tips
- Upon reaching 300 hours of intense use, it is appropriate to carry out a general revision and maintenance of the tool, which should include: cleaning, greasing and replacement of parts and pieces that may have reached the end of their useful life, as could happen with coals. and, in some cases, bearings.

- In the case of bench grinders, new wheels sometimes need regrinding to make them round.

- To keep the tool in proper condition, you must use the accessories and parts for the specific model you have.

- Using accessories of different sizes or handmade, not only affect the performance of the polisher, it can also represent serious safety risks for those who use it.

- Store the equipment in dry environments.

- Periodically clean the ventilation grills to avoid overheating the engine.