DEWALT 6-1/2-Inch 20V MAX Circular Saw, Tool Only (DCS391B)

 DEWALT 6-1/2-Inch 20V MAX Circular Saw, Tool Only (DCS391B)

•  5150 RPM motor of DEWALT circular saw delivers power and speed to make the most demanding cuts with ease
• High strength and lightweight magnesium shoe of the corded circular saw provides jobsite durability for long-term cut accuracy
• Optimized rubber overmolded comfort grip of the compact circular saw delivers optimal balance and control
• 0-50 degree bevel capacity allows for aggressive bevel cuts for a multitude of applications
• 6-1/2-inch carbide-tipped blade for cutting 2 times material at 90 degree and 45 degree and more cuts per charge

Learn how to use a circular saw along with some tips and advice

Know how to use a circular saw, what is the posture you should have when using it and how you should handle it to avoid accidents and obtain excellent results.

Tips for using the circular lock


How do you use a circular saw ? The proper posture for cutting with the circular saw is leaning over the machine, keeping the power cord always behind.

• You must first make it walk and when the disc picks up an even speed you can start cutting. At this point the mobile housing should be opened.
• Move the saw slowly and advance regularly according to the sound; If the engine noise decreases, the engine tires and you have to slow down.
• On the contrary, if the sound is kept even, the pushing force can be increased.
• At the end of the cut, the protective housing will close again, and only then should the operation of the tool be stopped.

Where to use circular saws?

• They require support on a flat surface to make the cut, so they are not suitable for sawing irregular materials.
• They are the recommended saws for straight cuts, both in the wire and across large solid wood boards and slats.
• Straight and bevel cuts in hard fibreboard and chipboard.
• They perfectly cut aluminum and plastic at low speeds.

Use and maintenance recommendations for circular saws

Use tips

• Confirm that the cutting blades are the ones you need for the material you are cutting.
• Check in the user manual how you should change and position the cutting blades.
• In the case of circular table saws, the knife must be adjusted, to prevent it from closing the cut and trapping the blade.
• Regulates the depth of cut. The bottom of the dividing knife should be 3mm from the bottom of the cutting blade.
• Support the material to be cut in such a way that the cutting blade does not come into contact with any material that is below the cutting step.
• Mark the pieces of wood that you are going to cut to size, with a tape measure.

Security advice

• Make sure you know and follow the safe handling instructions provided by the manufacturer at all times.
• Before starting work tasks, equip yourself with the necessary clothing, gloves, goggles, a mask and headphones, as a minimum.
• Wear clothes that are tight to your body and if you have long hair, wear it up. Do not use bracelets, rings or other elements that can be hooked or dragged, due to working with the saw.
• You must have the work area clear and free of objects, debris or planks, as they can cause falls and trips.
• Store the tool in a dry and safe place.
• Do not use saws that are wet or damp, and do not use it when your hands or feet are wet.
• Before starting work, check the sharpness of the blade, its condition, its fixation, the direction of rotation and leveling. Make sure the disc used is the correct one with the dividing knife.

Maintenance tips

• Turn the switch off and unplug the machine before performing maintenance or adjustment tasks.
• Every time you use the circular saw, you should clean the accumulated cutting particles. Use protective glasses for this.
• Check the user manual for instructions on maintenance or lubrication of the mowers.
• Do not use cleaners with synthetic components or aggressive agents to clean the work table. He prefers to use dishwasher detergents.
• You must bear in mind that neither the motor nor its electrical parts should come into contact with water.
• Check the saw blade regularly. Use only blades that are well sharpened and free of cracks.
• Only use original spare parts that comply with the respective regulations. How do you use a circular saw ? Now you know.

DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)

 DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)

•  Brushless motor of the electric hand planner provides power and runtime
• The hand planer featuring 30,000 cuts per minute achieves a fast removal rate
• 5/64-inch (2 mm.) maximum depth of cut
• Calibrated depth adjustment knob to 1/256-inch (0.01 mm. approximately)
• Precision-machined front and back aluminum shoes ensure parallelism of cut
• Kickstand allows user to rest the planer on work surface without gouging the material
• Precision machined groove in front shoe allows for edge chamfering

What's the use of band saw and usage tips and how to buy

Bandsaw Applications
In addition to drilling and screwing, sawing is one of the most common tasks in the carpentry workshop. How is a woodworking band saw .

There are several different types of saws for different uses. The classic choice, in addition to the simple hand saw, is clearly the circular saw, which can be found in most homes. This is closely followed by the circular saw or even the table saw. However, few home workshops have a band saw. While the band saw is one of the most interesting saws to use at home, it's often one of the last tools a typical DIYer gets.

Band saw applications are more diverse than they might first appear. They range from carpentry and maintenance work, handicrafts, cutting plastics and metals, sheets and MDF and the like.

Buy Bench, Professional and Hobby Bandsaw   | Buy used and new industrial band saw .

Check the price of the wood and metal band saw .

In this article, I'll try to give you an overview of some bandsaw use cases.

Simple cut of strips and boards
band saw cut

A strip, whether it's a baseboard or a roof strip, is rarely the length you want when you buy it. The band saw can start cutting immediately after measuring and marking. Holding the workpiece on the band saw with both hands eliminates time-consuming reinforcement of the workpiece in the lathe or tedious clamping, as is necessary, for example, when working with a circular saw or a hand saw. Compared to a table saw, setup time is virtually non-existent. If you have a little practice, even the smallest pieces of work can be processed.

Troubleshoot band saw problems

The band saw and different materials

When working with the band saw, it is not absolutely necessary to place different saw blades for different materials. Whether it's wood, aluminum, fine iron, brass or copper, the bandsaw's universal saw blade works with all materials.

Obviously, different saw blades with different teeth can also be attached to a band saw.

From wood to wood crafts with the band saw
Cutting different materials at the same time with a band saw

In German hardware stores, real solid wood is quite rare. The choice of wood is generally limited to soft spruce wood in various strengths and shapes. However, if you're planning to use hardwood or even fruit tree lumber for a project, you usually end up at a timber merchant with much higher prices than you'd expect from a hardware store.

If you only need small amounts of wood, the band saw will help. The band saw makes it possible to produce high quality handcrafted wood from a single piece of wood.

band saw cutting wood

To do this, you saw the wood with the bandsaw into correspondingly thick strips. The saw's cutting guide ensures that all strips of wood have exactly the same shape.

Once the sawn strips are dry, you can straighten them out with a planer and grinder and use them in your project. Whether as a raw material or glued like a wooden board, a project made from solid wood always looks high quality!

As the saw blade, unlike the circular saw, is very thin, it is possible to saw very thin strips of wood with the band saw. You can, for example, use this as a varnish or use wood glue to glue multi-layered spokes.

As the band saw blade is continuous and guided by rollers at the top and bottom, the saw cut is always exactly 90°. If you want to cut at other angles, you can adjust the saw table between the -4 to 46° range. As a result, every conceivable angle is made possible by the intelligent rotation of the workpiece.

sawing shapes
In sawing for shapes, the circular saw is used, which - as already mentioned - is available in almost every household. DIYers reflexively pick up feedback here. Those who have worked with jigsaws more often know the disadvantages in addition to the numerous advantages of this type of saw. When sawing with the jig saw, the saw is guided with one hand so that there is only one free hand to hold the workpiece. Once you've done this with a band saw, you'll learn to appreciate using the second hand when guiding the workpiece, the curved cuts are almost perfect with the band saw after a little practice. Tears in the wood fiber that normally occur at the bottom when cutting with a circular saw do not occur when cutting with a band saw.

The band saw for furniture manufacturing
When making dowels for furniture, plugs and screws are generally used, if you want to produce particularly stable wooden joints, you should really opt for snap and snap joints. While these classic joints can also be made the traditional way with hand tools, you can save a lot of time using the band saw.