Union 63182 Elephant Watering Can, 2 Quarts, 0.5 Gallons, Gray, Novelty Indoor Watering Can

 Union 63182 Elephant Watering Can, 2 Quarts, 0.5 Gallons, Gray, Novelty Indoor Watering Can

•  Easy fill rear entry port
• Made of weather resistant plastic
• Long trunk which helps in watering plants
• Novelty watering can favorite. Made in usa
• Happiest elephant watering can on the market

How to water potted plants

Do you know how to water potted plants? There are up to three different systems of watering depending on the species. Take note!

Not all plants need the same amount of water, nor the same irrigation system. If in our section of cards we explained how much water each plant needs, now we explain the three methods that are usually used to water the pots .

Unlike garden plants, potted plants need more water because the substrate is limited and evaporates sooner. In addition, depending on the location we will also have to water more or less regularly.

Pot irrigation systems

1. Irrigation from above This
is the most common system and the one used by most plants. With a watering can, a glass or a bottle we apply the water directly on the substrate from above. It is important to avoid that the leaves or the flowers come into contact with the water, since they can spoil or favor the appearance of fungi.

2. By immersion
The pot is placed in the sink or in a bucket with water. It is a perfect system for epiphytes or orchids .

Immersion irrigation

3. Through the plate
This system makes the plant drink the amount it considers necessary through the roots . The water is poured directly on the plate of the pot and left for a few minutes until the plant is hydrated. Afterwards, the excess is discarded. It is ideal for bulbs or plants with stems or leaves that are sensitive to moisture.

Irrigation is best done first or late in the morning . The best way to measure the plants is to let the surface layer of the substrate dry between watering and watering. If we see that the leaves are limp or begin to turn yellow, we will have to increase the waterings slightly. If, on the contrary, we see that fungi appear or the leaves acquire a brown tone, it is that we are exceeding the waterings.

How many times should a plant be watered?

Irrigation is the contribution of water that is made to the plants so that they maintain their hydration and can properly carry out their vital processes.

Depending on the climate of the area in which we are, the season of the year, the drought cycles, the type of terrain, the variety of plant in question, or whether it is found in the interior or in the exterior of a house, we must water it more or less frequently. Therefore, we must be very careful with recommendations such as: water twice a week, water every three days; there are so many variables that by wanting to be methodical we can end the life of the plant.


To know if a plant needs water, it is best to touch the surface of the earth where it is located. If it is dry, try to open the surface a little to check the degree of humidity. If we cannot find it, we must provide it with water.

Another system that helps us to assess the water needs of the plant is to add a little water and observe how quickly or slowly it absorbs it. If you do it quickly, you have to continue adding small amounts until the upper part is damp. If, on the other hand, the water does not absorb quickly or does not even sink into the ground, it is that its humidity level is correct. All this always taking into account the geographical area in which we live, the existing humidity, air and sun conditions. If you live in a very dry and hot area, the surface layer of soil in the pots may dry out a lot and the incorporation of water produces an effect similar to that mentioned above when it already has a lot of water: it takes longer to absorb. In this case it does not mean that you already have enough water.

We must pay attention to all the plants that we have in the garden or on the terrace, not only those that are exposed to the sun. The passage of air or the type of soil also influences the loss of moisture from the plant.



Depending on the size of the plant or the pot in which it is located, we must make a greater or lesser contribution of water. A small container tends to dry faster than a large one. In the case of gardens, it must be taken into account that larger plants need to create more nutrients to feed themselves and, therefore, they need more water to maintain themselves.

It is convenient that, in the case of pots, we place a clay or metal seedling under the pot. In this way we will avoid rotting the plant and we will ensure that the roots can absorb the liquid element that has leaked in the watering. We will also prevent moisture spots from appearing on the ground, since the pots concentrate it in the lower part of it.



In all cases, it must be remembered that all pots must have a hole in the lower part to be able to expel any excess water.

We must also pay attention to the type of water we give to our plants. Limestone water is not good for plants, but if we have no other option, we can cancel its degree of acidity with lemon juice. The proportion is one lemon for every five liters of water.

It is also important that we control the water temperature, especially in indoor plants and in winter. It is recommended that it be warm and even somewhat hot since the contribution of very cold water can make the plant sick.

Tips on How to Water Your Tree

Learning how to water a tree is one of the best ways to keep it healthy and stress-free, especially during the hottest months of the year. But did you know that the most common watering mistake is actually too much water?

Whether it's too much or too little water, watering can be tricky if you don't know how. Follow this guide to ensure your Bios Urn® tree thrives .

 

Tips on how to water a tree

What time to water your tree
During a typically hot afternoon , up to half the water can be lost to evaporation. The best time to water is in the morning or at night, so the roots have a chance to absorb most of the water.

However, there is no magic schedule for watering trees . How often you should water will depend on the size of your tree, soil conditions, and weather conditions. Newly planted trees require much more water than established ones, more details on this are detailed below.

The best way to determine when your tree needs water is to check the soil. What you are looking for is moist soil, not soggy. In the absence of rain or moisture, check the soil with a garden trowel to a depth of two inches (5 cm). If the soil is dry to the touch, your tree needs water.

The amount of water
For well-established trees, the rule of thumb is generally 10 gallons of water (about 38 liters) for every inch (2.5 cm) of the tree's diameter. You can use a ruler at knee height to measure.

How to water a tree
Perhaps the most important element of irrigation when it comes to trees is the 'how'. Slow and deep is recommended , which is why drip lines are the preferred method of irrigation (although spraying from a garden hose will certainly work). Drip irrigation also loses less water through evaporation compared to sprinkler irrigation systems.

Deep watering allows the critical root zone to absorb adequate moisture. When setting up a drip line, make sure it extends to the entire area under the tree canopy and to a depth of 10 inches (25 cm) if possible.

Consistency is key
Allowing the soil to dry out completely, or allowing it to soak up, will result in a stressed tree, and therefore more prone to disease and infestation. Keeping the soil constantly moist is essential for the health of the trees.

Choosing the right tree species
In regions where drought is typical, choose drought-tolerant species when planting new trees. Drought-tolerant trees are adapted to dry climates and will not only grow better, but also help you conserve water. Remember that you can use the Bios Urn® with the tree you want .

Newly planted trees
Young trees are still establishing their root systems and therefore need more water . Water newly planted trees once a day for the first two weeks after planting, and once a week thereafter during the growing season.

Remember to check the soil to make sure you are not over-watering. Once the roots begin to extend beyond the root ball, you can water on a normal schedule.

 

Mulch is your best friend
Mulch is a very effective way to keep the soil from drying out quickly , especially during excessive heat. Mulching 2-4 inches deep (5-10 cm) will help conserve moisture and regulate soil temperature.

 

Water all year
Don't forget to water your tree in winter during dry spells. Just because they are dormant does not mean that their trees are not growing. Water when air and soil temperatures are above 40 degrees F (4.5ºC) and when there is no snow. Your trees will thank you later!