Milwaukee 48-11-1862 M18 18-Volt Lithium-Ion High Output 6.0Ah Battery Pack (2-Pack) (Non-Retail Packaging)

 Milwaukee 48-11-1862 M18 18-Volt Lithium-Ion High Output 6.0Ah Battery Pack (2-Pack) (Non-Retail Packaging)

 About this item

•     Product will either come in original packaging that is in less than perfect shape and has been opened to inspect contents or will come in non-retail packaging (brown/white box or white/clear bag). REDLINK Intelligence: Our battery circuitry provides optimized performance and overload protection using total system communication between tool, battery and charger
•     Best-in-class construction: Offers long-lasting performance and the best protection against jobsite, weather and environmental conditions
•     Fuel gauge onboard: Displays remaining run-time
•     Versatility: Powers all 175-plus M18 cordless solutions
•     Compatible with all M18 tools

Battery expansion pack

Blink cameras can operate normally for two years on a pair of AA lithium metal batteries. For indoor (gen 2) and outdoor cameras, the Blink Battery Expansion Pack provides up to 2 years of bonus under normal use, giving you up to 4 years of camera operation. The battery expansion pack is not compatible with Indoor (gen 1), XT, XT2 and Mini cameras.

Battery Expansion Pack: Installation   Removal Assembly

The Expansion Battery Pack replaces the pair of batteries in your camera with four batteries found on the back cover of your camera.


Note: The reset button on the camera is accessible when the expansion pack is in place, but the Micro USB socket is locked and the serial number QR code label is covered.

To add or re-add a camera with the attached battery extender pack, you must do one of the following:

Please record the serial number of the camera before installation and enter it manually when requested by the application.
Remove the battery expansion pack to access the serial number and QR code label when prompted by the app.

Installing the battery expansion pack

1. Remove the back cover and batteries from your camera. You will find detailed instructions here . Align the USB power port with the opening in the expansion battery pack.

2. Place the expansion pack by pressing it evenly over the camera's battery hole. You can press the tab holders or on the four tab locating triangles engraved on the expansion pack until the tabs click into place.

3. Check the fit by separating the two objects. If there is no movement, follow the battery example engraved on the expansion pack (shown here in red) to install the four AA-size non-rechargeable lithium batteries.

4. The battery expansion pack has a notch in the housing that exactly corresponds to a sample on the back cover of the camera. Align the notches and then hold the cover in place while holding the screw bracket. Turn the screw clockwise (to the right) until it is snug and the cap is flush with the surrounding edges.

 

If you don't use the mounting hole, replace the silicone screw cap, then check the camera operation and the batteries to make sure everything is correct.

For more information on mounting your camera click here .

Remove the battery expansion pack

1. Remove the back of the camera from the expansion pack. You will find detailed instructions here .


2. Remove all batteries from the expansion pack. You can use the opening tool to remove the batteries if necessary. Never use sharp or metallic objects to remove batteries .


3. Squeeze one of the tab holders toward its closest edge and this should release the clip. Repeat this on the other side and then remove the battery expansion pack. Note that you can use the opening tool to pry if you need to, even if you use only the necessary force to release the fixing clips.


4. After inserting a new pair of AA lithium batteries, you can replace the back cover of the camera and fix it with a screw and screwdriver.

The back cover should be flush with the camera housing, so you should not overtighten it. Install the screw cap if you don't use a bracket.

Mounting with the battery expansion pack

With a battery expansion pack and four batteries in place, the camera weighs more and is 'longer' than before. Because of this, gravity has a greater effect on the position of the camera. The right angle adapter included with the camera places weight away from the fulcrum of the mount, which can cause the camera with the battery to drop or slowly change position over time.

When the battery expansion pack is attached, we highly recommend using the bracket directly, without the right angle adapter.