Carmyra Portable Chainsaw Mill 36 Inches Planking Milling Bar Size 14 Inches to 36 Inches
- High Quality Steel and Aluminum Construction
- Cut Cedar, Walnut and Oak into High Quality Lumber
- High-Quality Mill Cuts Beams or Lumber from 0.5“ ”To 13“ Thick and 36” Wide
- Attaches to saw without drilling bar
- Lower price
Best Chainsaw Mill
Cutting wood can be a big pain in the butt. Especially since they require a lot of effort and time to move. Taking it to the sawmill requires a lot of labor and a few dollars as well. This tubular metallic structure uses a common chainsaw to be used as a portable sawmill.
You may also know them as an Alaskan mill. The accuracy you will get from one of these is nothing less than what you would get from a sawmill. With a torpedo level, you can make sure the boards are completely level and all that.
Chainsaw Mill Buying Guide
Finding the perfect tool for a project is not everyone's preference. Some key points must be noted before purchase as it is the only way to get an effective product. To serve this purpose, I disclose some key points that I obtained from my experience to guide you to the best chainsaw.
The adjustability of saw kerf
Sometimes you need to make thin boards out of the wood, sometimes thicker ones. Using the same mill, this purpose is achieved if the mill allows you to adjust the cut size. In most cases, power saws allow cuts from 0.5 to 13 inches thick. If you want more variations, choose the dedicated ones.
Weight
If you need to carry the tool where you felled the tree, choose a lighter chainsaw. They will serve the purpose of cutting on site. Later, you can adjust the cut in the workshop with a larger chain saw. The lightest ones can weigh 6 kilos, while the heaviest ones can reach 18 kilos.
Maximum Capacity of the Bar
Suppose you have to cut a huge log with a diameter of 36 inches, but the adjustment capacity of your chainsaw is between 24 inches. It's going to be a big mess. That's why consider the width of the logs you have to deal with regularly. Then ask for one that you can handle the most.
Cut Adjustment
The chainsaw bar is primarily responsible for determining the cutting capacity. But the chainsaw can help adjust the capacity. Check this tuning option if you need to handle huge logs.
Material:
Aluminum and stainless steel dominate the market. Aluminum is lightweight and stainless steel is robust. Also, this combination does not pick up rust easily. That's why major manufacturers use them extensively. You shouldn't go with older options that are only built with steel.
Key
If you've been milling for a while, especially with the larger logs, you may have noticed that it's difficult to slide the setup along with the log. That's why manufacturers have installed a key mechanism to facilitate sliding. This is an option that can be seen on high end chainsaws from trusted manufacturers.
Chainsaw compatibility
A common problem with budget options is that they just don't fit on high-powered saws. Furthermore, the vibration generated by the instability of the arrangement brings great discomfort to the miller. That's why, if you're going for budget options, you need to have a chainsaw with moderate production.
assembly time
No drill will save you a lot of time when fixing and repairing your saw with the milling machine. This tool may be assembled soon. Also, a detailed instruction manual will help you reach the goal quickly.
Accessories
You may find it difficult to tighten a bolt to a specific point without having a wrench of a specific measurement. That's why manufacturers supply them with chain saws.
But to cut budgets, you might not find them in cheaper chainsaws. This shouldn't be a problem if you have a good collection of tools to trade.
Return policy
It is possible that the chainsaw you ordered does not match your chainsaw. Furthermore, any defect may occur during shipping or handling. Make an effort to review the returns policy, especially focusing on financing and replacement options.
Reviews of the best chainsaw mills
As you've already gone through the shopping guide, you should now be ready to choose the best portable chainsaw. The list below shows the best choices for various uses that are currently available. Buckle up to get the best!
1. Carmyra Portable Electric Saw Mill
appealing treats
At the top of the list comes an economical option. If you are new to milling and don't need to cut a lot of hard wood, this chainsaw can delight you.
This tool can handle logs from 14 to 36 inches wide. Thanks to your adjustable kerf option. It's simple to extend the jaws to enclose large trunks. You can also find an electric saw that can handle a 48 inch wide log from the same manufacturer. Stubs 0.5 to 13 inches thick can be cut with the tool.
Yes, the time to set up the configuration is a crucial parameter. This time is also shortened by some accessories provided by the manufacturer. They provide you with a key that can provide you the most needed leverage.
You don't have to worry about the return policy. This tool is backed by a one month money back guarantee. As noted earlier, this tool is for serving people who are up to small projects. That's why the tool can smooth the edge of lighter boards. Thanks to its simplified design.
When it comes to the material used to build the tool, you won't be disappointed. While this is an economical option, the manufacturer chose the best combination of durability and light weight. Steel and aluminum are used as the main construction material for the tool. This tool weighs about 16 lbs.
Glitches
A powerful chainsaw is needed to get the proper leverage.
2. Chain saw by ALASKAN Granberg
appealing treats
This is a product with the trusted brand name Granberg. If you've been looking for a chainsaw for a while, you've probably heard its name. Yes, this G777 model is highly appreciated around the world for its compatibility, efficient design and continuous operation.
This chain saw was chosen to cut beams or lumber 0.5 to 13 inches thick and 17 inches wide. This allows you to handle smaller logs and get a lot of variation in cuts. That's why this is a more standard setup you can find than most other chainsaws out there.
The assembly process of this tool is something very easy. This mill connects to the saw without drilling. That means you don't have to waste time adjusting screws and other parts. The mill can fit chainsaws with bars of 20 inches or less.
Steel was chosen as the main construction material for this tool. That's why it's robust enough to withstand heavy milling and last for years. In addition, its light weight allows you to carry and saw saws wherever you want.
Glitches
Not for bigger chainsaws.
Guide rail not included.
3. Popsport Chainsaw Mill Planking Milling
appealing treats
This tool is made to deal with big boys. You can adjust the jaws to accommodate logs 14 to 36 inches wide. If the mill is combined with a chainsaw larger than 60 cc, the result will be spectacular.
When it comes to the editing process, I must say, it's very easy. The manufacturer provides a detailed guide that depicts step-by-step procedures for assembling the tool. The design was made to keep in mind that you can set up the mill wherever you need it in a minimum amount of time.
Once you start working with this tool, you'll find that the setting creates less vibration to handle speed and therefore provides a smoother cut. Thanks to the end brackets that feature an improved design. Now you can easily adjust the height and width.
The manufacturer chose top-notch materials to build the tool. That's why they end up with an elegant profile mill. Stainless steel provides strength to withstand the stress of regular milling. Also, aluminum is used to minimize weight. That's why the tool is portable and can be carried easily.
Glitches
It's hard to understand the guide.
4. Granberg G555B Laminator
appealing treats
You may have heard of Granberg since the beginning of his carpentry career. They simply make every kind of tool needed for woodworking. As a result, they launched this 'minimill'.
This tool is not the perfect alternative for those mills that work with large logs. Instead, this tool targets the shortest ones and can handle logs up to 25 inches wide. This mill can be used with a chain saw that has 16 to 36 inch bars and 50-70 cc or more displacement.
Its compact design is something really interesting. Although this is a cost-effective solution, the manufacturer used aircraft aluminum and zinc-plated steel. It is a commendable combination that can guarantee durability and effectiveness. The tool only weighs 6 lbs. Excellent combination for portability must say.
Assembling this edge milling machine is really easy. The manufacturer provides you with a 12-foot V-rail as a cutting guide. These attachments reduce your workload and require only tightening the nuts and clamping the saw. Then you are ready to go! This rail helps you work together with the log without any problems.
You get a cutting manual to learn how to make this cut correctly. This manual is written in a way that can help newcomers become familiar. Even for professionals who want to scale logs anywhere, this tool can be a great companion. This cost-effective tool can be a useful addition to any woodworker's arsenal.
Glitches
Not suitable for larger logs.
5. Zchoutrade Portable Electric Saw Mill
appealing treats
The Zchoutrade chainsaw may be the toughest competitor for most American brands that sell the adjustable chainsaw. The main reason is the cost. This upstart manufacturer offers almost the same quality but at a reduced price.
As noted earlier, this is an adjustable power saw that can provide support for logs up to 36 inches. This means you have a great opportunity to handle large parts instead of paying a sawmill's fees. Like most portable sawmills, this one can also cut stabs 0.5 to 13 inches thick.
It's easy to install! You may face the need for a portable sawmill in different locations to cut logs right there. This chainsaw can easily provide this facility due to its portability. The total weight will be around 15 lbs when fully assembled.
Although the tool has a low price, no compromises were made during the choice of materials. The manufacturer chose steel as the main building material, but at the same time kept aluminum. That's why the tool is light and less vulnerable to rust.
Glitches
Two operators are required for proper operation.
6. Alaska Granberg MK-IV Chainsaw Mill
appealing treats
Here are the professional attacks again! You may have heard about this Alaskan chainsaw mill if you work with large logs or beams. This is probably the most reverted option for sizing larger logs.
You can handle a log of various thicknesses. This tool will help you cut boards from ½ inch to 13 inches thick. That means you don't need to be bothered, even when you need less thick stabs. All credit goes to its movable arms which are quite easy to adjust. This tool can handle logs up to 27 inches wide.
Less than an hour is enough to assemble the entire set. The manufacturer provides some accessories to make the setup process faster. The key that comes with the set especially needs to be mentioned. You will find it useful to screw in some hard-to-reach spots.
Yep, this big guy weighs about 18 pounds, a lot heavier than his counterparts. But it must be remembered that this tool was designed to handle heavy logs. In that sense, this is a commendable design from the manufacturer. They used steel along with aluminum for aircraft to reduce weight.
Glitches
A little expensive than others.
Carrying is difficult for those who are overweight.
7. Imony chainsaw mill Portable chainsaw mill
appealing treats
At the end of the list, I like to present an awesome tool from Imony. Although Imony is not a very familiar brand, they produce tools that will impress you. They have two chainsaws in their arsenal for two different uses.
One of the chainsaws is for chainsaws up to 24 inches and the other up to 36 inches. Both are economical but offer a great milling experience. You can cut boards of various widths by adjusting the jaws. This feature is useful, especially when you need to handle different types of wood.
Many manufacturers use aluminum to reduce weight. Yes, in this case aluminum is also used for a compact profile. Additionally, aluminum has strengthened the tool to protect against rust. 304 stainless steel exists to ensure durability.
The handle is designed to be more ergonomic and effective. Due to its improved design, the chainsaw can also be easily fitted with the guide rail and be a great cut of time.
Glitches
You may have difficulty adjusting high powered saws.
Common questions
Here are some frequently asked questions and their answers.
How big a chainsaw do I need for a sawmill in Alaska?
Re: Husqy size for Alaskan Mill
For occasional use and just a 24 ″ bar, a 3120 is probably overkill, but would leave room to upgrade to larger logs. Looking at the older huskys, a 288xp, 394xp, 2100 would also be excellent choices for a mill. Stihl, a good 066\660 would also work fine.
Does a rip current cut faster?
Re: tear current
I think regular chain tears faster, but chain tear produces a smoother cut. Cutting is much faster if you can use a long bar and cut at an angle that doesn't directly attack the final grain, you know the angle that produces those long shavings that eventually clog your saw.
Why is Husqvarna better than Stihl?
Side by side, Husqvarna overtake Stihl. Its security features and anti-vibration technology make it easier and safer to use. And while Stihl chainsaw engines may have more horsepower, Husqvarna chainsaws tend to be more efficient and better at cutting. When it comes to value, Husqvarna is also a top choice.
What brand of chainsaw do loggers use?
stihl 460
The most popular saws I see here are stihl 460 and husky 372xp. These are probably 90% of the saws used by logging crews here. Many of the woodcutters, tree services and homeowners have them here too.
What is the most powerful chainsaw?
Husqvarna's largest chainsaw is one of the most powerful in the world. The main applications of the 3120 XP® are logging, portable sawmills and working with stumps. This saw is designed to pull the chain on our longer bars. Like all Husqvarna chainsaws, the 3120 XP® has a superior weight/power ratio.
Is it worth grinding your own wood?
The spirit may be willing, but milling your own wood is an expensive, time-consuming and often frustrating process. On the other hand, it can be a personally rewarding and potentially profitable venture—the logical link between a fallen tree and your workshop.
How long must logs dry before sawing?
You must seal the ends minutes after cutting; you shouldn't wait hours, and definitely not days! Drying time varies depending on the wood species and the thickness of the logs, but they will take at least one to two years to dry - the longer you can leave them before starting to build, the better.
Stihl makes a tearing chain?
Stihl 26RS 81 Links to units. 325 Pitch. 063 gauge fast chainsaw chain (2 pcs).
Is Echo better than Stihl?
ECHO - Stihl offers the best options and reliability with chainsaws. ECHO has better residential options for trimmers, blowers and trimmers. … Stihl may have an advantage in some areas, while ECHO is better in others. So let's start the decomposition process.
What is the best selling chainsaw?
STIHL
STIHL - The best-selling chainsaw brand.
Is Stihl made in China?
Stihl chainsaws are manufactured in the United States and China. The company has facilities in Virginia Beach, Virginia and Qingdao, China. “Made by STIHL” is a brand promise - regardless of production location.
What is the most aggressive chainsaw chain?
Stihl
chain The Stihl chain is slightly more expensive, but it is the most aggressive chain commonly available. It's also made from the hardest steel, so it holds a better edge than any other brand I've tried (including Carlton, Saber and Bailey's Woodsman Pro).
What is the advantage of a jumped tooth chain?
A jump chain has fewer cutting teeth than a conventional chain, which means it won't drag as many teeth into the wood you're cutting. Less drag on the chain means less energy is needed to cut the log. This means your saw's motor runs faster, which keeps it on a more efficient power curve.
Q. How should the chainsaw bar and guide rail be placed?
Ans: The most efficient way to cut the log is to position the guide rail parallel to the chainsaw bar. This setting helps you get more out of it than any other setting.
Q. Should the configuration be cleaned after each use?
Ans: It depends on the condition of the configuration after milling. But the rule is to clean the setup and also sharpen the chain after several uses.
in short
Luckily, you've found the best chainsaw in Alaska that fits your purpose. But if you have the slightest doubt, don't worry! Let me help you further to get the best chainsaw. In this I mentioned some of the chainsaws that have captured my heart.
If you want to choose a mini chain saw that is super portable, try the Granberg G555B Embroidery Mill. But for handling larger logs, Alaska's Granberg MK-IV chainsaw mill will be a better option. Alternatively, the Zchoutrade portable chain saw mill can add value for your money.
MILLED BARS
WHAT IS MILLING AND WHY IS IT KEY TO CREATING MILLED BARS?
Milling is a machining operation, just like drawn, ground and rolled steel. The metal in milling is removed by a rotating tool known as a cutter, which has multiple cutting edges. Each of the edges removes a slight amount of metal with each movement of the shaft to which the part is clamped. The machine that carries out the entire milling process is called a milling machine. In this way, it is possible to produce milled bars, normally applied in forging and welding of various products. In milling, chips are removed by rotating the cutter. The cutter is a tool with several cutting edges, so each cut is only in contact with the part for a few moments of rotation and can be cooled throughout the rest of the cycle. Usually, it is steel industries that carry out this type of operation, selling different types of milled steel to larger industries, which manufacture other final products using the part. There are some variables and cutting parameters to be carried out before milling. As with all machining processes, there are a number of fundamental parameters to consider. It is through them that it is possible to quantitatively describe the movements, dimensions and other characteristics of the cutting operation.
Know some movement parameters:
• Rotation frequency (n - rpm): it is the number of revolutions per unit of time that the cutter makes around its axis.
• Cutting Speed (Vc – m/min): it is the instantaneous speed of the selected point on the cutting edge, in the cutting movement, in relation to the part. In milling, the cutting movement is provided by the rotation of the tool.
• Feed Speed (vf – mm/min): It is the instantaneous speed of the selected point on the edge, in the feed movement, in relation to the workpiece. In milling, the infeed movement is caused by the tool moving over the workpiece or vice versa.
THE IMPORTANCE OF MILLED BARS
Milled bars are mainly used in the manufacture of tools for work at high temperatures, such as forging dies, pressure casting, molds for the plastics industry, among other applications. To have the quality of a milled bar, it needs to go through the milling process. Aços Express works with quality milled bars, which guarantee a final product with a high level of strength and usefulness. We work with experienced manufacturers in the market, who follow current standards and tests already defined with regard to dimensions and strength of materials. Make your online purchase of our materials, we deliver throughout Brazil.
